Question Details

(Solved) Technology Review #1: Emerging Application of Technology (Consumer or Business). This paper is the first of two Technology Reviews that you will...

need a research paper covering the questions posted

Technology Review #1: Emerging Application of Technology (Consumer or Business).
This paper is the first of two Technology Reviews that you will research and write for this course. For this
paper, you must choose an emerging application of technology which is suitable for future use in a
consumer-oriented product or service (i.e. a new product for personal or home use) or a businessoriented product or service.
The technology review papers will be used to prepare your technology selection paper for the Analysis of
Alternatives exercise later in the course. Your audience for these papers is a group of senior executives
who will be meeting to decide which emerging technologies or emerging applications of technologies
should be selected for one or more security-focused, Internal Research & Development projects during
the next budget cycle. Each of these executives is responsible for a business area that will (a) develop
products which incorporate the emerging technologies or (b) depend upon such products to support
their organization’s operations.
For this paper, you will perform the first three stages of the technology scan:
Technology scanning is an evaluation model that is used when you need to develop a list of
candidate technology solutions. A technology scan can also be used when you need to obtain
information about the latest advancements in security products and technologies.
The technology scan has four stages: scoping, searching, evaluating, and recommending.
The scoping phase of this technology scan has already been performed. Your scope is stages 3, 4, and
early stage 5 as shown in the figure below. Image Source:
Copyright © 2015 by University of Maryland University College. All rights reserved. SEARCHING
To begin, select a technology which is in the early-stage technology development, product development
or early production/marketing stages of the product lifecycle (Stages 3, 4, or early stage 5 in the figure
above). You may use news articles, press releases, and government or company Web sites to help you
find an appropriate technology. (Remember to cite these sources in your paper.)
Technologies which are currently in these stages include: Big Data Analytics
Wearable Computing Devices (choose 1 specific device)
Physical Unclonable Functions (PUFs) (devices & electrical circuits)
Dielectric thin films
Magneto-electric magnetic sensors
Nano imprinting
Nano machines
Neuromorphic computer chips You are encouraged to look for and investigate additional appropriate technologies before deciding upon
your technology choice for this assignment.
If you decide to research a technology that is not on the suggested technologies list (see above), you
must first request and receive your instructor’s permission. Your instructor may require that you do
preliminary library searches for research papers and technical papers to prove that you can find a
sufficient number of resources to complete the assignment.
Survey of the Professional Literature
During your survey of the professional literature, you will identify 10 research papers or technical papers
which provide technical information about your selected technology (see selection requirements for
each paper). These papers must be dated 2011, 2012, 2013, 2014, or 2015 (five year window).
Allowable sources for research papers / technical papers are: (a) professional journals, (b) conference
proceedings, (c) dissertations or theses, and (d) technical magazines (published by either the ACM or
IEEE). If an article from one of the above sources does not have a reference list containing at least 3
references you may use it in your review paper but it WILL NOT COUNT towards the “10 research or
technical papers” requirement.
The requirement to “survey the professional literature” must be met by using research
papers/publications and technical papers which are available from the following UMUC online library
databases: Copyright © 2015 by University of Maryland University College. All rights reserved. ACM Digital Library
Dissertations & Theses (Pro Quest)
IEEE Computer Society Digital Library
Science Direct
In this stage, you will evaluate and report upon the information found during your survey of the
professional literature. Read the abstract, introduction section, and closing sections for each of the
sources identified in your survey of the professional literature. From this information, develop a
summary of the technology that includes: (a) a description of technology and (b) planned uses of the
technology (products, services, etc.). IMPORTANT: your technology review must incorporate information
from each of your 10 “papers” from the professional literature.
Note: You may use other sources in addition to the papers which comprise your survey of the
professional literature.
Next, brainstorm the security implications of this technology (if these are not specifically discussed by
your sources). You should consider use of the technology to improve cybersecurity and uses which will
negatively impact the security posture of an organization or the security of individual consumers or users
of the product. It is very important that you consider BOTH SIDES OF THIS ISSUE.
Note: Remember that the security posture of a system or product is framed in terms of risk,
threats, vulnerabilities, etc. Improvements to the security posture (positive security implications)
will result in reduced risk, increased resistance to threats or attacks, and decreased vulnerability.
Negative impacts on the security posture will result in increased risk, decreased resistance to
threats / attacks, and increased vulnerability (weakness).
Write down your thoughts and ideas about the security implications of this technology using (a) the Five
Pillars of Information Assurance and/or (b) the Five Pillars of Information Security. For your paper, you do
not need to include all ten “pillars” but you should address a minimum of three. If you are targeting an
“A” on your paper, address at least five of the pillars. Five Pillars of Information Assurance: confidentiality, integrity, availability, authentication, and
non-repudiation. These are defined in CNSSI-4009 and discussed quite nicely by K. S. Wilson in
Conflicts Among the Pillars of Information Assurance
direct=true&db=edswsc&AN=000322695100011&site=eds-live&scope=site Copyright © 2015 by University of Maryland University College. All rights reserved. Five Pillars of Information Security: protection, detection, reaction, documentation, prevention.
If you are not familiar with the origins of the five pillars of Information Security, read a copy of
the original article by Amir Ameri at You should provide specific examples using characteristics and/or applications of the technology, e.g. an
emerging technology which can be used to manufacture cell phone cases which are less breakable may
be chosen to replace current materials because the new material will decrease the risk of breakage.
Decreased risk of breakage will decrease the probability of loss of availability caused by a broken case.
Decreasing the probability of a negative event will decrease the risk associated with that event.
Your paper must provide the reader with an overview of the technology followed by information about
the potential security risks and/or benefits of its use (the security posture ).You MUST use information
paraphrased from the papers found during your Survey of the Professional Literature (with appropriate
in-text citations).
Your Technology Review papers should be at least three pages in length but no more than five pages
(excluding the title page and references page).
Your papers must comply with the formatting guidance provided by your instructor. All papers in this
course must also comply with APA Style for references and citations. See the resources posted under
Content > Course Documents > APA Resources.
You are expected to write grammatically correct English in every assignment that you submit for grading.
Do not turn in any work without (a) using spell check, (b) using grammar check, (c) verifying that your
punctuation is correct and (d) reviewing your work for correct word usage and correctly structured
sentences and paragraphs. Together, these items constitute the professionalism category in the
assignment grading rubrics (worth 20% of the assignment’s grade).
Grading Rubric: Consult the grading rubric for this assignment for specific information about content and
formatting requirements. Copyright © 2015 by University of Maryland University College. All rights reserved.


Solution details:

This question was answered on: Sep 05, 2019

PRICE: $15 (25.37 KB)

Buy this answer for only: $18

This attachment is locked

We have a ready expert answer for this paper which you can use for in-depth understanding, research editing or paraphrasing. You can buy it or order for a fresh, original and plagiarism-free solution (Deadline assured. Flexible pricing. TurnItIn Report provided)

Pay using PayPal (No PayPal account Required) or your credit card . All your purchases are securely protected by .

About this Question






Sep 05, 2019





We have top-notch tutors who can do your essay/homework for you at a reasonable cost and then you can simply use that essay as a template to build your own arguments.

You can also use these solutions:

  • As a reference for in-depth understanding of the subject.
  • As a source of ideas / reasoning for your own research (if properly referenced)
  • For editing and paraphrasing (check your institution's definition of plagiarism and recommended paraphrase).
This we believe is a better way of understanding a problem and makes use of the efficiency of time of the student.


Order New Solution. Quick Turnaround

Click on the button below in order to Order for a New, Original and High-Quality Essay Solutions. New orders are original solutions and precise to your writing instruction requirements. Place a New Order using the button below.


Order Now