## (Solved) CIVL4122/6122: Structural Analysis II Instructor: Adel E. Abdelnaby, P. 106C Engineering Science BLDG [emailÂ protected]/* */ (901) 678 - 4633...

Problem 2

Problem 2. Draw the bending moment, normal force and shear force diagrams for the shown frame.Please note that the inertia of the beam is twice the columnâ€™s inertia.

CIVL4122/6122: Structural Analysis II
Instructor: Dr. Adel E. Abdelnaby, P.E.
106C Engineering Science BLDG
[emailÂ protected]
(901) 678 - 4633
Department of Civil Engineering
University of Memphis Homework # 4 (due March 22)
Problem 1. Determine the tension in the steel tie (diameter 3/8 inch, E = 20,000 KN/cm2) and draw the
bending moment diagram for the timber beam of given cross section (E = 1,000 KN/cm2). Hence
calculate the vertical deflection at point n, vn. 20 cm
Steel Tie
2m 4 KN 6 KN 15 cm
n
a b
3m 3m 2m 2m Problem 2. Draw the bending moment, normal force and shear force diagrams for the shown frame.
Please note that the inertia of the beam is twice the columnâ€™s inertia. 20 KN/m 40 KN 2I 2m I 4m 4m 12 m 4m Problem 1. For the shown truss, determine the forces in all members due to the applied loads. EA =
300,000 KN 1 3 7 5 9 40 KN 3m a 2 b 4
40 KN 40 KN 4x4 = 16 m c

Solution details:
STATUS
QUALITY
Approved

This question was answered on: Sep 05, 2019

Solution~000200103574.zip (25.37 KB)

This attachment is locked

We have a ready expert answer for this paper which you can use for in-depth understanding, research editing or paraphrasing. You can buy it or order for a fresh, original and plagiarism-free solution (Deadline assured. Flexible pricing. TurnItIn Report provided)

STATUS

QUALITY

Approved

Sep 05, 2019

EXPERT

Tutor